Instant Adhesive

Approx. 45 / Piece Get Latest Price

Vetra LV-401 is a low viscosity, ethyl cyanoacrylate adhesive, which is suitable for bonding a very wide range of materials where very fast cure speed is required. When a thin layer of Vetra LV-401 is applied between two surfaces, it comes into contact with atmospheric moisture, a rapid polymerization occurs producing the ultimate bond.

 

 Applications

Vetra LV-401 is specially formulated for high strength, general purpose bonding of most of the non-porous substrates like plastics, rubbers, metals and porous substrates like wood, leather etc. It is recommended for use on assemblies with very close fitting parts and smooth, even surfaces. It can also be used as a post-assembly adhesive to wick into parts.

 How to use

• Make sure the surfaces to be bonded are clean and dry (preferable to solvent-wipe plastics, glass, and rubber, and to acid-treat metals).
• Dispense a drop or drops to one surface only. Apply only enough to leave a thin film after compression.
• Press parts together and hold firmly for a few seconds. Good contact is essential. An adequate bond develops in less than one minute. 
• Wipe off excess adhesive from the top of the container and recap Vetra LV-401 if left uncapped, may deteriorate by contamination from moisture in the air.
• Because Vetra LV-401 condenses by polymerization, sometimes whitening will occur on the surface of the container.

 Restriction of usage

It will not bond PTFE, nylon, polypropylene etc.

 Shelf Life

12 months from date of manufacturing. It comes without a warranty as storage condition will affect the shelf life.

 Storage

• Keep products in the unopened container in a cool and dry location. Best when stored product in a cool, dry place at temperature 20-25°C. Temperatures less than 2°C can adversely affect product properties. Do Not Freeze.
• Keep packing tightly closed until ready for use.

Approx. 20 / Piece Get Latest Price

One Drop Instant Adhesive

Fevikwik is low viscous cyanoacrylate adhesive which is used to bond close fitting parts or components. The bonding is effective due to the wicking ability of the product.

 

Features And Benefits

Fevikwik is suitable for bonding plastics, metal and rubber components. It can be also used to lock components which are already assembled. It has typical applications in molded furniture, sign boards, gift articles. It is also used for wide range of industrial applications.

Method Of Application

For best results, please ensure that surface is dry & free from moisture, dust, dirt, rust, grease & oil, etc. Surface should be degreased and abraded by using suitable emery paper. Apply Fevikwik on the surface of one adherent in a thin film or drop and spread uniformly. Quickly bond the surface of other adherent and hold firmly for few seconds until the parts achieve sufficient handling strength.